Users can make changes to the most common DinoCapture 2.0 settings from within the software, however, some advanced settings can only be enabled/disabled by editing a configuration file called “DC20.ini” located inside DinoCapture’s “Digital Microscope” folder. Follow the steps below to make changes to this file:

1. Close DinoCapture 2.0
2. Navigate to: “C:\Users*Username*\Documents\Digital Microscope\Setting”
3. Open the file named “DC20.ini” in a text editor (i.e. Notepad).
4. Locate and edit the settings of your choice.
5. Save changes and close your text editor.
6. Relaunch DinoCapture.

[FRAME RATE]
Frame_Rate_Max_2011=30
Frame_Rate_Max_2111RX=30
Frame_Rate_Max_3X11=30
Frame_Rate_Max_3X11RX=30
Frame_Rate_Max_313=30
Frame_Rate_Max_3X13=30
Frame_Rate_Max_3X13RX=30
Frame_Rate_Max_413=30
Frame_Rate_Max_4X13=30
Frame_Rate_Max_4X13RX=30
Frame_Rate_Max_4115=30
Frame_Rate_Max_4515=30
Frame_Rate_Max_4815=30
Frame_Rate_Max_4915=30
Frame_Rate_Max_4X17=30
Frame_Rate_Max_7013_1.3M=15
Frame_Rate_Max_7013_5M=10
Frame_Rate_Max_7013RX_1.3M=15
Frame_Rate_Max_7013RX_5M=8
Frame_Rate_Max_7X15_1.3M=25
Frame_Rate_Max_7X15_5M=10
Frame_Rate_Max_73X15_1.3M=45
Frame_Rate_Max_73X15_5M=15
Frame_Rate_Video_Recording=20

[CAMERA PREVIEW WINDOW CONTROL]
Click_Frame_To_Capture=on
Save_Preview_Window_Position=on
Save_Annotation=off

[GLOBAL FUNCTION]
Output_Crosshair_XY_To_Clipboard=0
Continuous_Measurement=0
Measurement=on
Drawing=on
Annotation=on
Auto_Update=on
Hotkeys=on
ShortCuts=on
SaveAsDPI=96/180/240/300
Video_Timestamp=Off,FFFFFF
Timestamp_Format=0
;0 = YYYY:MM:DD MM:SS
;1 = YYYY:MM:DD MM:SS.s
;2 = YYYY:MM:DD MM:SS.ss
;3 = YYYY:MM:DD MM:SS.sss
Audio_Recording=off
Max_Zoom_Ration=4
;(2,4) if Max_Zoom_Ration=4,measurement/drawing is unavailable
WiFi_Enabled=on
Fullscreen_Mode=off

[DISPLAY AND SOUNDS]
View_Image_List=on

[WINDOW COORDINATION]
DC_Main_Form_Top=-9
DC_Main_Form_Left=-9
DC_Main_Form_Height=1060
DC_Main_Form_Width=1938

[IP CAMERA SERVER]
Server1=off
Server2=off
Server3=off
Server4=off
Server1_Password=
Server1_Port_Num=43521
Server2_Password=
Server2_Port_Num=43522
Server2_Left=210
Server2_Top=100
Server3_Password=
Server3_Port_Num=43523
Server3_Left=210
Server3_Top=100
Server4_Password=
Server4_Port_Num=43524
Server4_Left=210
Server4_Top=100
Server1_Left=738
Server1_Top=362

[IP CAMERA CLIENT]
Client1=off
Client2=off
Client3=off
Client4=off
Client5=off
Client6=off
Client7=off
Client8=off
Client9=off
Client10=off

[DRAWING DEFAULT SETTING]
Color_Text=0000ff
Color_Line=ff0000
Color_GridLine=0000e1
Color_Line2=
Size_Text=12
Width_Line=1
Drawing_Save_Last_Setting=on

[MEASUREMENT PROPERTY]
Distance_Line=DL
Continuous_Line=ML
Point_To_Line=PL
Polygon=PG
Radius_Circle=RC
Diameter_Circle=DC
Three_Points_Circle=TC
Three_Points_ARC=AR
Three_Points_Angle=TA
Four_Points_Angle=FA
Circles_Center_Distance=CC
Fixed_Line=FL
Lasso=LS
Color_Average=CLA
Fixed_Angle=SA
Edge_Tracing=PG

[AUTO MAGNIFICATION READING]
AMR_Disable=off

[BARCODE READER SETTING]
Barcode_Enable=0
;0=off, 1=on, 2=disable anyway
Barcode_Detect=
;0=detect always, 1=detect when microtouch pressed
Send_Result_To_Clipboard=0
Send_Result_To_Active_Window=0
Ignore_Repetitive_Data=0
Barcodes_Qty_To_Read=1
Scan_Spacing_Pixels=10
Threshold_Mode=Automatic
Threshold=40
Quiet_Zone_Size=Normal
Scan_Period_Seconds=3
Type_Code11=1
Type_Code39=1
Type_Code39Ext=1
Type_Code93=1
Type_Code128=1
Type_Codabar=1
Type_Inter2of5=1
Type_PatchCode=1
Type_EAN13=1
Type_EAN8=1
Type_UPCA=1
Type_UPCE=1
Type_Plus2=1
Type_Plus5=1
Type_Postnet=1
Type_Planet=1
Type_RM4SCC=1
Type_AustraliaPost=1
Type_IntelligentMail=1
Type_PDF417=1
Type_DataMatrix=1
Type_QRCode=1
Type_MicroQR=1
Type_PharmaCode=1
Scan_Top_To_Bottom=1
Scan_Bottom_To_Top=1
Scan_Left_To_Right=1
Scan_Right_To_Left=1
Checksum_Code11=0
Checksum_Code39=0
Checksum_Code93=0
Checksum_Inter2of5=0
Process_Image_Invert=0
Process_Image_Despeckle=0
Process_Image_Erode=0
Process_Image_Dilate=0
Process_Image_Sharp=0

[EDOF]
MaxStep_ManualEDOF=30